Central anchor knot devices，Mid-point Anchor Clamp for Contact Wire

Mid-point Anchor Clamp for Contact Wire

Application:To anchor and connect between the contact wire with section area 85mm², 120mm², 150mm² and the messenger wire with section area 70mm², 95mm²,120mm².
Material:CuNi2Si 06Cr19Ni10
Technics:Metal die forging, formed by punching
Performance:1.Max. horizontal working load is 1.1 times of the rated working tension load of the contact wire.Max. working load is 1.1 times of connected conductor.
2.Sliding load with the contact wire shall not less than 1.5 times of the contact wire's rated working tension load.
3.Within the scope 95% of the standard breaking force of the mid-point anchor rope for contact wire, the mid-point anchor rope of contact wire should not slip out from the clamp.

Mid-point Anchor Clamp for Messenger Wire

Mid-point Anchor Clamp for Messenger Wire

Application:To anchor and connect between the contact wire with section area 85mm²,120mm², 150mm² and the messenger wire with section area 70mm2, 95mm2, 120mm2.
Material:CuNi2Si
Technics:Metal die forging
Performance:1.Max. horizontal working load is 1.1 times of messenger wire's rated working tension load.
2.Sliding load with messenger wire shall not less than 1.1 times of messenger wire' s rated working tension load.