Terminal anchoring clamp
Carrier cable terminal anchoring clamp
Application:Used for the terminal anchor of messenger wire with section area 120mm2、150mm2、70mm2、95mm2
Material:ZG270-500
Technics:Precise casting, hot galvanization
Performance:1.Max. working load is 1.1 times of the rated working tension load of the connected conductor.
2.Sliding load: within the scope 95% of the standard breaking force of connected contact wire, the contact wire should not slip out from the clamp, and also should not have the wire broken inside the clamp and at the end of the clamp.
3.Tensile failure load: shall not less than 3 times of max. working load.
Carrier cable terminal anchoring clamp
Application:Used for the terminal anchor of messenger wire with section area 70mm2、95mm2、120mm2、150mm2
Material:QAL9-4
Technics:Metal mould forging
Performance:1.Max. working load is 1.1 times of the rated working tension load of the connected conductor.
2.Sliding load: within the scope 95% of the standard breaking force of connected contact wire, the contact wire should not slip out from the clamp, and also should not have the wire broken inside the clamp and at the end of the clamp.
3.Tensile failure load: shall not less than 3 times of max. working load.
Contact wire terminal anchoring clamp
Application:It is used for the terminal anchor of copper alloy contact wire with section area 85mm2、120mm2、150mm2 in the electrification railway catenary system.
Material:ZG270-500 45#
Technics:Precise casting, metal die forging, hot galvanization
Performance:1.Max. working load is 1.1 times of the rated working tension load of the connected conductor.
2.Sliding load: within the scope 95% of the standard breaking force of connected contact wire, the contact wire should not slip out from the clamp, and also should not have the wire broken inside the clamp and at the end of the clamp.
3.Tensile failure load: shall not less than 3 times of max. working load.
Contact wire terminal anchoring clamp
Application:Suitable for electrified railway catenary copper alloy contact wire terminal anchorage in the system.
Material:QAL9-4
Technics:Metal die forging technology
Performance:1.Max. working load is 1.1 times of the rated working tension load of the connected conductor.
2.Sliding load: within the scope 95% of the standard breaking force of connected contact wire, the contact wire should not slip out from the clamp, and also should not have the wire broken inside the clamp and at the end of the clamp.
3.Tensile failure load: shall not less than 3 times of max. working load.