Non-limited positioning device
Steel locator
Application：To fix the contact wire in the place of straight line of main line section or cantilever of the curved line or crossing location.
Material： 20#seamless steel tube, QAl9-4 Q235A
Technics：Metal die forging, formed by mould pressing, hot galvanization
Performance：1.Max. working load is 2.5kN.
2.Withstanding tensile load is 3.75kN,Withstanding compression load is 2.5kN.
3.Failure load is 7.5kN.
Special locator
Application：To the overlap pole where that one of the two contact wires is supported which is more far away from the mast.
Material：20#seamless steel tube, QAl9-4 Q235A
Technics：Formed by mould pressing, hot galvanization
Performance：1.Max. working load 1.3kN.
2.Withstanding tensile load is 1.95kN,Withstanding compression load is 1.3kN.
3load shall not less than 4.9kN.
The anchor positioning clamp
Application：Used at the fixing place of out-of-running contact wire.
Material：ZG270-500
Technics：Metal die forging, hot galvanization
Performance：1.Max. horizontal working load is 4.5kN.
2.Sliding load with steady tube shall not less than 6.75kN.
3.Grip load with the connected cable shall not less than 4.OkN.
4.Failure load shall not less than 13.5kN.
holder
Application：It is suitable for fixing steady clamp in steady device.
Material：ZG270-500
Technics：Metal die precise casting, hot galvanization
Performance：1.Max. working load is 2.5kN.
2.Withstanding tensile load is 3.7kN.
3.Failure load shall not less than 7.5kN.
