Soft across the positioning device
Application: suitable for electrified railway catenary system soft across the positioning line installed on the locator.
With the position loop clamp Position loop clamp
Application: suitable for soft across positioning cable locator or contact suspension installed on suspension.
Material: Q235A.
Process: Metal mould forging, hot dip galvanized
Performance: 1. The peak work load of 2.5 kN, the maximum vertical work load of 4.9 kN.
2. With the sliding load between the positioning line not less than 4.9 kN.
3. The level of damage load no less than 7.5 kN, vertical load is not less than 14.7 kN.
Horizontal carrier cable clamp Double cross carrier cable clamp
Application: To suspend the dropper wire at head一span messenger wire with section area 50mm2~ 80mm2 of electrification railway overhead contact system.
Material: Q235A.
Process: Metal mould forging, hot dip galvanized
Performance:1. The maximum vertical parts work load is not less than 7.9 kN.
2. The vertical parts failure load is not less than 23.7 kN.
3. The sliding load between the clamp and horizontal carrier cable not less than 9.8 kN.