HC
TLG-1BG/D type motor speed sensor
delivery time: 2 weeks
Operating Voltage
DC12V ~ DC16V
working frequency
0Hz ~ 20kHz
output waveform
square wave
Load Resistance
≥1kΩ
low level
≤1.5V
Number of output channels
dual channel
duty cycle
50%±25%
working air gap
0.4mm ~ 1.5mm
No-load power consumption current
≤40mA
Insulation resistance
≥100MΩ@500VDC
Dielectric strength
AC500V/50Hz/60s
phase difference
90°±30° (see Figure 1 for direction definition).
Electromagnetic Compatibility
Comply with GB/T 24338.4-2009
high level
≥(Vcc-3)V (Vcc is the power supply voltage)
Protective function
Power supply polarity protection, output short circuit protection
Shielding layer treatment
It is not connected to the sensor mounting seat, but is connected to the connector pin, and is connected to the shielding layer of the vehicle end through the pinhole, and is grounded at the shielding layer of the vehicle end.