Contact Wire Splice Fitting
Application:To connect the double grooved contact wire of copper or copper alloy.
Material:CuNi2Si
Technics:Metal die forging
Performance:1.Max. working load is 33kN.
2.Failure load shall not less than 99kN.
3.Sliding load: within the scope 95% of standard breaking force of connected contact wire, the contact wire should not slip out from the clamp, and also should not have wire broken inside the clamp and at the end of the clamp.
Messenger Wire Splice Fitting
Application:To connect the messenger wire.
Material:QAl9-4
Technics:Metal die forging
Performance:1.Max. working load is 16.5kN for the clamp of C70, C95,Max. working load is 23.1kN for the clamp of C120, C150.
2.Failure load is 49.5kN for C70 C95,Failure load is 69.3kN for C120 C150.
3.Slide load: within the scope 95% of standard breaking force of connected wire,the wire should not slip out from the clamp, and also should not have wire broken inside the clamp and at the end of the clamp.