HC
TQG15-G photoelectric speed sensor
Delivery time: 2-3 weeks
Environmental parameters
Conditions of Use
Altitude
≤2500m
Operating temperature
-40℃～+70℃
Relative humidity
≤95% (the monthly average minimum temperature is 25℃)
shock vibration
Meet GB/T 21563-2008 category 3 axle installation requirements
Protection class
IP66
Performance parameters
Electrical parameters
voltage
Nominal voltage value: DC15V or DC24V. Can work in DC12V～DC30V
Speed range
0rpm～3000rpm
Number of output channels
2/3/4/6
Pulses per revolution
200 or 96
output waveform
Square wave, rise and fall time are not more than 10μs
Load Resistance
≥3kΩ
high level
≥0.8 Vcc (Vcc is the power supply voltage)
low level
≤2V
duty cycle
50%±10%
phase difference
90°±30° (Refer to Figure 1 for the definition of the clockwise direction)
No-load power consumption current
≤50mA
Insulation resistance
≥50MΩ@500VDC
Dielectric strength
AC1500V/50Hz/60s
Special series meet AC5000V/50Hz/60s
Electromagnetic Compatibility
Comply with GB/T 24338.4-2009
Protective function
Power supply polarity protection, output short circuit protection
